Basic User's Guide

28
4
How to send a fax 4
The following steps show how to send a fax.
a When you want to send a fax, or change
fax send or receive settings, press the
(FAX) key to illuminate it in blue.
 The LCD shows:
b Do one of the following to load your
document:
 Place the document face up in the
ADF. (See Using the automatic
document feeder (ADF) on page 26.)
 Load your document face down on
the scanner glass. (See Using the
scanner glass on page 27.)
Note
To send color faxes with multiple pages
use the ADF.
c Set the scanner glass size, fax
resolution or contrast if you want to
change them.
For more advanced fax sending
operations and settings, see Sending a
fax in Chapter 3 of the Advanced User's
Guide:
 Broadcast
 Duplex Scan (2-sided fax layout)
 Delayed Fax
 Batch TX
 Real Time TX
 Polled TX
 Overseas Mode
 Fax Resolution
 Contrast
 Coverpg Setup (Coverpage
Setup)
 Coverpage Msg
d Choose one of the options below:
 If you want to send a single-sided
document, go to Step e .
 If you want to send a 2-sided
document, press Duplex.
Note
• You can send 2-sided documents from the
ADF.
• When the machine is ready to scan
2-sided documents the LCD shows for
Duplex in the lower right corner.
e Enter the fax number using the dial pad
(up to 20 digits), a One touch key or
a Speed Dial and enter three-digit
number.
Sending a fax 4
01/01/2011 15:00
Fax Only
Dial & Start