Copier User's Guide

Appendix A

Installation when using a Network Print Queue or Share

(printer driver only)

Note

• You must configure the IP address on your machine before you proceed with this section. If you have not

configured the IP address, see Configuring your network printer on page 8 first.

• Verify the host computer and print server are either on the same subnet, or that the router is properly

configured to pass data between the two devices.

• Before installation, if you are using personal Firewall software (e.g. Windows Firewall), disable it. Once

you are sure that you can print, re-start your personal Firewall software.

a Start the CD-ROM installation menu program according to the Quick Setup Guide.

b Select the model name and your language (if necessary), and then click

Install Other Drivers or Utilities.

c Click Printer Driver (Only).

d Click Next in response to the Welcome message. Follow the on-screen instructions.

e Select Standard Installation and click Next.

f Select Network Shared Printer, and then click Next.

g Select your printer’s queue, and then click OK.

Note

Contact your administrator if you are not sure about the location and name of the printer in the network.

h Click Finish.