User Manual

Troubleshooting and routine maintenance
191
C
Machine Information C
Checking the Serial Number C
You can see the machine’s Serial Number on
the LCD.
a (For MFC-9325CW) Press Menu, 8, 1.
(For MFC-9125CN) Press Menu, 6, 1.
b Press Stop/Exit.
Checking the Page Counters C
You can see the machine’s Page Counters
for copies, printed pages, reports and lists,
faxes or a summary total.
a (For MFC-9325CW) Press Menu, 8, 2.
(For MFC-9125CN) Press Menu, 6, 2.
b Press a or b to see Total, Fax/List,
Copy or Print.
c Press Stop/Exit.
Checking the remaining life of
parts C
You can see the machine’s parts life on the
LCD.
a (For MFC-9325CW) Press Menu, 8, 3.
(For MFC-9125CN) Press Menu, 6, 3.
Machine Info.
3.Parts Life
b Press a or b to choose 1.Drum,
2.Belt Unit, 3.PF Kit or
4.Fuser.
Press OK.
c Press Stop/Exit.
Reset Functions C
The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings such as the
password and IP address information.
2 Address & Fax
Address & Fax resets the following
settings:
 Address Book
(One Touch Dial/Speed Dial/Setup
Groups)
 Programmed fax jobs in the memory
(Polled TX, Delayed Fax)
 Station ID
(name and number)
 Coverpage Msg
(comments)
 Remote Fax Option
(Remote Access Code, Fax Storage,
Fax Forwarding and PC-Fax)
 Report settings
(Transmission Verification Report/Tel
Index List/Fax Journal)
 Setting Lock password
3 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
Note
Unplug the interface cable before you
choose Network or All Settings.