User Manual
Table Of Contents
- USER’S GUIDE MFC-9125CN MFC-9325CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I: General
- 1 General information
- Using the documentation
- Accessing the Software User’s Guide and Network User’s Guide
- Viewing documentation
- Viewing documentation (Windows®)
- How to find scanning instructions
- Software User’s Guide:
- ScanSoft™ PaperPort™ 11SE with OCR How-to-Guides:
- How to find Network setup instructions
- Viewing documentation (Macintosh)
- How to find scanning instructions
- Software User’s Guide:
- Presto! PageManager User’s Guide:
- How to find Network setup instructions
- Viewing the Mobile Print/Scan Guide documentation
- Viewing documentation
- Accessing Brother Support (For Windows®)
- Control panel overview
- 2 Loading paper and documents
- 3 General Setup
- 4 Security features
- 1 General information
- Section II: Fax
- 5 Sending a fax
- How to fax
- Broadcasting (black & white only)
- Additional sending operations
- Sending faxes using multiple settings
- Electronic cover page (black & white only)
- Contrast
- Changing Fax Resolution
- Dual access (black & white only)
- Real Time Transmission
- Overseas Mode
- Delayed Fax (black & white only)
- Delayed batch transmission (black & white only)
- Checking and cancelling waiting jobs
- Sending a fax manually
- Out of memory message
- 6 Receiving a fax
- 7 Telephone and external devices
- Telephone line services
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD
- External and extension telephones
- 8 Dialling and storing numbers
- 9 Remote Fax Options (black & white only)
- 10 Polling
- 11 Printing reports
- 5 Sending a fax
- Section III: Copy
- Section IV: Direct printing
- Section V: Software
- Section VI: Appendixes
- A Safety and legal
- B Options
- C Troubleshooting and routine maintenance
- Troubleshooting
- Error and maintenance messages
- Routine maintenance
- Replacing the consumable items
- Replacing periodic maintenance parts
- Machine Information
- Packing and shipping the machine
- D Menu and features
- E Specifications
- F Glossary
- Index
Troubleshooting and routine maintenance
181
C
g Slide the drum unit and toner cartridge
assembly into the machine. Make sure
that you match the toner cartridge colour
to the same colour label on the machine.
C-Cyan M-Magenta Y-Yellow K-Black
h Close the top cover of the machine.
Resetting the drum counter C
When you replace a drum unit with a new
one, you need to reset the drum counter by
completing the following steps:
a Plug the machine’s power cord back into
the electrical socket first, and reconnect
all cables and telephone line cord. Turn
on the machine.
b (For MFC-9325CW) Press Menu, 8, 4.
(For MFC-9125CN) Press Menu, 6, 4.
c Press a or b to choose the colour of the
drum you replaced. Press OK.
d Press 1 to reset the drum unit counter.
e Press Stop/Exit.
Replacing the belt unit C
Model name BU-200CL
A new belt unit can print approximately
50,000 A4 or Letter size single-sided pages.
Belt End Soon message C
Belt End Soon
If the LCD shows Belt End Soon, it means
the belt unit is near the end of its life. Buy a
new belt unit and have it ready before you get
a Replace Belt message.
Replace Belt message C
When the following message appears on the
LCD, you need to replace the belt unit:
Replace Belt
IMPORTANT
•
DO NOT touch the surface of the belt unit.
If you touch it, it could degrade print quality.
• Damage caused by incorrect handling of
the belt unit may void your warranty.
K
Y
M
C