User Manual
Table Of Contents
- USER’S GUIDE MFC-9125CN MFC-9325CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I: General
- 1 General information
- Using the documentation
- Accessing the Software User’s Guide and Network User’s Guide
- Viewing documentation
- Viewing documentation (Windows®)
- How to find scanning instructions
- Software User’s Guide:
- ScanSoft™ PaperPort™ 11SE with OCR How-to-Guides:
- How to find Network setup instructions
- Viewing documentation (Macintosh)
- How to find scanning instructions
- Software User’s Guide:
- Presto! PageManager User’s Guide:
- How to find Network setup instructions
- Viewing the Mobile Print/Scan Guide documentation
- Viewing documentation
- Accessing Brother Support (For Windows®)
- Control panel overview
- 2 Loading paper and documents
- 3 General Setup
- 4 Security features
- 1 General information
- Section II: Fax
- 5 Sending a fax
- How to fax
- Broadcasting (black & white only)
- Additional sending operations
- Sending faxes using multiple settings
- Electronic cover page (black & white only)
- Contrast
- Changing Fax Resolution
- Dual access (black & white only)
- Real Time Transmission
- Overseas Mode
- Delayed Fax (black & white only)
- Delayed batch transmission (black & white only)
- Checking and cancelling waiting jobs
- Sending a fax manually
- Out of memory message
- 6 Receiving a fax
- 7 Telephone and external devices
- Telephone line services
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD
- External and extension telephones
- 8 Dialling and storing numbers
- 9 Remote Fax Options (black & white only)
- 10 Polling
- 11 Printing reports
- 5 Sending a fax
- Section III: Copy
- Section IV: Direct printing
- Section V: Software
- Section VI: Appendixes
- A Safety and legal
- B Options
- C Troubleshooting and routine maintenance
- Troubleshooting
- Error and maintenance messages
- Routine maintenance
- Replacing the consumable items
- Replacing periodic maintenance parts
- Machine Information
- Packing and shipping the machine
- D Menu and features
- E Specifications
- F Glossary
- Index
Troubleshooting and routine maintenance
163
C
Cleaning the drum unit C
Small spots on the printed pages C
If your printout has any small white or
coloured spots, follow the steps below to
solve the problem.
a Open the manual feed slot cover.
b Using both hands, slide the manual feed
slot paper guides to the width of the
paper that you are going to use.
c Using both hands, put one blank sheet
of paper in the manual feed slot until the
front edge of the paper touches the
paper feed roller. Wait until the machine
automatically feeds the paper. When
you feel the machine pull in the paper,
let go.
Note
• Make sure that the paper is straight and in
the correct position on the manual feed
slot. If it is not, the paper may not be fed
correctly, resulting in a paper jam.
• Do not put more than one piece of paper
in the manual feed slot at any one time, as
it may cause a jam.
• If you put paper in the manual feed slot
before the machine is in the Ready mode,
an error may occur and the machine will
stop printing.
d Make sure that the machine is in the
Ready mode.
Press Menu, 4, 8.
Drum Cleaning
Press Start