User Manual

ManualsBrandsBrother ManualsAll in One PrinterMFC-9325CW

151

152

153

154

155

156

157

158

159

160

Table Of Contents

USER’S GUIDE MFC-9125CN MFC-9325CW

142

Offset image

 Make sure that the media type settings in the printer driver and in the

machine's Paper Type menu matches the type of paper you are

using. (See Acceptable paper and other print media on page 18 and

Basic tab in the Software User's Guide on the CD-ROM.)

 Make sure that two grey levers inside the back cover are in the up

position.

 Check the machine’s environment. Conditions such as dry and low

temperatures may cause this print quality problem. (See Choosing a

location on page 108.)

 Identify the colour causing the problem and put in a new drum unit.

(See Replacing the drum units on page 178.)

To identify the colour of the drum unit, visit us at

http://solutions.brother.com/

to view our FAQs and troubleshooting

tips.

Poor fixing

 Make sure that the media type settings in the printer driver and in the

machine's Paper Type menu matches the type of paper you are

using. (See Acceptable paper and other print media on page 18 and

Basic tab in the Software User's Guide on the CD-ROM.)

 Make sure that two grey levers inside the back cover are in the up

position.

 Choose Improve Toner Fixing mode in the printer driver. (See Other

Print Options (For Windows

printer driver), Advanced options (For

Windows

BR-Script printer driver), Print Settings (For Macintosh

printer driver) or Printer Features (For Macintosh BR-Script printer

driver) in the Software User's Guide on the CD-ROM.)

If this selection does not provide enough improvement, select

Thicker paper in Media Type settings.

Curled or wavy

 Choose Reduce Paper Curl mode in the printer driver when you do

not use our recommended paper. (See Other Print Options (For

Windows

printer driver), Advanced options (For Windows

BR-Script printer driver), Print Settings (For Macintosh printer driver)

or Printer Features (For Macintosh BR-Script printer driver) in the

Software User's Guide on the CD-ROM.)

 If you do not use the machine often, the paper may have been in the

paper tray too long. Turn over the stack of paper in the paper tray.

Also, fan the paper stack and then rotate the paper 180 in the paper

tray.

 Store the paper where it will not be exposed to avoid high

temperatures and high humidity.

Examples of poor print

quality

Recommendation

ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.