User Manual

204
7.Network
(MFC - 9320CW)
(continued)
1.Wired LAN
(continued)
2.Ethernet — Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Chooses the
Ethernet link mode.
See
Network
User
’ s
Guide on
the
CD
- ROM.
3. Set to Default — 1.Reset
2.Exit
Restore the wired
network setting to
factory default.
4. Wired Enable — On*
Off
Enable or Disable the
Wired LAN manually.
2.WLAN 1.TCP/IP 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best
suits your needs.
2.IP Address [000-255]. [000-255].
[000-255]. [000-255]
Enter the IP address.
3.Subnet Mask [000-255]. [000-255].
[000-255]. [000-255]
Enter the Subnet
mask.
4.Gateway [000-255]. [000-255].
[000-255]. [000-255]
Enter the Gateway
address.
5.Node Name BRWXXXXXXXXXXXX Enter the Node
name.
6.WINS Config Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server Primary
[000-255]. [000-255].
[000-255]. [000-255]
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Specifies the IP
address of the
primary or secondary
WINS server.
8.DNS Server Primary
[000-255]. [000-255].
[000-255]. [000-255]
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Specifies the IP
address of the
primary or secondary
DNS server.
9.APIPA On*
Off
Automatically
allocates the IP
address from the
link-local address
range.
Main
Menu
Submenu Menu Selections Options Descriptions Page