User Manual
Table Of Contents
- USER’S GUIDE MFC-9120CN MFC-9320CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I: General
- Section II: Fax
- Sending a fax
- How to fax
- Broadcasting (black & white only)
- Additional sending operations
- Sending faxes using multiple settings
- Electronic cover page (black & white only)
- Contrast
- Changing Fax Resolution
- Dual access (black & white only)
- Real Time Transmission
- Overseas Mode
- Delayed Fax (black & white only)
- Delayed batch transmission (black & white only)
- Checking and cancelling waiting jobs
- Sending a fax manually
- Out of memory message
- Receiving a fax
- Telephone and external devices
- Dialling and storing numbers
- Remote Fax Options (black & white only)
- Polling
- Printing reports
- Sending a fax
- Section III: Copy
- Section IV: Direct printing
- Section V: Software
- Section VI: Appendixes
- Index
- brother CHN_ENG
154
e Slide each drum unit and toner cartridge
assembly into the machine. Make sure
that you match the toner cartridge color
to the same color label on the machine.
C-Cyan M-Magenta Y-Yellow K-Black
f Repeat steps c to e to clean the
remaining corona wires.
g Close the top cover of the machine.
h Plug the machine’s power cord back into
the electrical socket first, and then
reconnect all cables and telephone line
cord. Turn on the machine.
Cleaning the drum unit C
Small spots on the printed pages C
If your printout has any small white or colored
spots, follow the steps below to solve the
problem.
a Open the manual feed slot cover.
b Using both hands, slide the manual feed
slot paper guides to the width of the
paper that you are going to use.
K
Y
M
C