Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE DCP-9010CN / MFC-9010CN / MFC-9120CN / MFC-9320CW
- Table of Contents
- 1 Introduction
- 2 Configuring your machine for a network
- Overview
- IP addresses, subnet masks and gateways
- Step by step chart
- Setting the IP address and subnet mask
- Changing the print server settings
- Using the BRAdmin Light utility to change the print server settings
- Using the BRAdmin Professional 3 utility to change print server settings (Windows®)
- Using the control panel to change the print server settings
- Using Web Based Management (web browser) to change the print/scan server settings
- Using Remote Setup to change the print server settings (Not available for Windows Server® 2003/2008) (For MFC-9120CN and MFC-9320CW)
- Using other methods to change print server settings
- 3 Configuring your machine for a wireless network (For MFC-9320CW)
- Overview
- Wireless network terms and concepts
- Step by step chart for wireless network configuration
- Confirm your network environment
- Confirm your wireless network setup method
- Configuration using the Brother installer application on the CD-ROM to configure your wireless network machine (Recommended)
- Configuration using the SES/WPS or AOSS control panel menu (Automatic Wireless mode) (Infrastructure mode only)
- Configuration using the machine’s control panel Setup Wizard to configure your machine for a wireless network
- Configuration using the PIN Method of Wi-Fi Protected Setup (Infrastructure mode only)
- Configure your machine for a wireless network
- Using the Brother installer application on the CD-ROM to configure your machine for a wireless network
- Using the SES/WPS or AOSS control panel menu to configure your machine for a wireless network (Automatic Wireless mode)
- Using the Setup Wizard from the control panel
- Using the PIN Method of Wi-Fi Protected Setup
- 4 Wireless configuration for Windows® using the Brother installer application (For MFC-9320CW)
- 5 Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only)
- 6 Control panel setup
- Network menu
- TCP/IP
- Ethernet (wired network only)
- Setup Wizard (MFC-9320CW wireless network only)
- SES/WPS/AOSS (MFC-9320CW wireless network only)
- WPS w/PIN Code (MFC-9320CW wireless network only)
- WLAN Status (MFC-9320CW wireless network only)
- Set to Default (MFC-9320CW only)
- Wired Enable (MFC-9320CW wired network only)
- WLAN Enable (MFC-9320CW wireless network only)
- E-mail / IFAX (For MFC-9120CN and MFC-9320CW: available as a download)
- How to set a new default for Scan to E-mail (E-mail server) (For MFC-9120CN and MFC-9320CW: available as a download)
- How to set a new default for Scan to FTP (For MFC-9120CN and MFC-9320CW)
- How to set a new default for Scan to Network (For MFC-9120CN and MFC-9320CW)
- Fax to Server (For MFC-9120CN and MFC-9320CW: available as a download)
- Time Zone (For MFC-9120CN and MFC-9320CW)
- Restoring the network settings to factory default
- Printing the Network Configuration List
- Network menu
- 7 Driver Deployment Wizard (Windows® only)
- 8 Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
- 9 Internet printing for Windows®
- 10 Network printing from Macintosh using the BR-Script 3 driver
- 11 Web Based Management
- Overview
- How to configure the machine settings using Web Based Management (web browser)
- Password information
- Secure Function Lock 2.0 (For MFC-9320CW)
- Changing the Scan to FTP configuration using a web browser (For MFC-9120CN and MFC-9320CW)
- Changing the Scan to Network configuration using a web browser (For MFC-9120CN and MFC-9320CW)
- 12 Internet fax and Scan to E-mail (E-mail server) (For MFC-9120CN and MFC-9320CW)
- Internet fax overview
- Getting connected
- Control panel key functions
- Sending an Internet fax
- Manually entering text
- Receiving E-mail or Internet fax
- Receiving an Internet fax to your computer
- Forwarding received E-mail and fax messages
- Relay broadcasting
- TX Verification Mail
- Setup Mail TX
- Setup Mail RX
- Error mail
- Important information on Internet fax
- Scan to E-mail (E-mail server) overview
- Internet fax overview
- 13 Security features
- Overview
- Configuring the protocol settings
- Managing your network printer securely
- Printing documents securely using IPPS
- Using E-mail notification with user authentication
- Creating and installing a certificate
- 14 Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the TELNET console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS to configure the IP address
- Installation when using web services (For Windows Vista® and Windows® 7 users)
- Installation when using a Network Print Queue or Share (printer driver only)
- Appendix B
- Index
101
11
11
Overview 11
A standard Web Browser can be used to manage your machine using the HTTP (Hyper Text Transfer
Protocol). You can get the following information from a machine on your network using a web browser.
Printer status information
Change Fax configuration items, such as General Setup, Quick-Dial settings and Remote Fax
Change network settings such as TCP/IP information.
Configure Secure Function Lock 2.0
Configure Scan to FTP
Configure Scan to Network
Software version information of the machine and print server
Change network and machine configuration details
Note
We recommend Microsoft
®
Internet Explorer
®
6.0 (or greater) or Firefox 1.0 (or greater) for Windows
®
and
Safari 1.3 (or greater) for Macintosh. Please also make sure that JavaScript and Cookies are always
enabled in whichever browser you use. If a different web browser is used, make sure it is compatible with
HTTP 1.0 and HTTP 1.1.
You must use the TCP/IP protocol on your network and have a valid IP address programmed into the print
server and your computer.
Note
• To learn how to configure the IP address on your machine, see Configuring your machine for a network
on page 12.
• You can use a web browser on most computing platforms, for example, Macintosh and UNIX users are
also able to connect to the machine and manage it.
• You can also use the BRAdmin applications to manage the printer and its network configuration.
• This print server also supports HTTPS for secure management using SSL. (See Managing your network
printer securely on page 125.)
Web Based Management 11