User Manual

8
6
Choose a Receive Mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
a Press Menu, 0, 1.
Initial Setup
1.Receive Mode
b Press a or b to choose the receive mode.
Press OK.
c Press Stop/Exit.
7
Choose your language
(if needed)
a Press Menu.
b Press 0.
c Press 0.
d Press a or b to choose your language.
Press OK.
e Press Stop/Exit.
8
Set The LCD contrast
(if needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a Press Menu, 1, 5.
General Setup
5.LCD Contrast
b Press a to increase the contrast.
—OR—
Press b to decrease the contrast.
Press OK.
c Press Stop/Exit.
For more details, see Receiving a fax in
Chapter 6 of the User’s Guide.
Do you want to use the telephone features of your
machine (if available) or an external telephone or
external telephone answering device connected on the
same line as the machine?
Your machine
automatically answers
every call as a fax.
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the phone will
ring for you to pick up
the call.
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored
on the external TAD.
Fax messages are
automatically printed.
You control the phone
line and must answer
every call yourself.
Do you want the machine to
answer fax and telephone calls
automatically?
Manual
Fax Only
Fax/Tel
External TAD
No
Yes
Yes
No
No
Yes
Are you using the voice message
function of an external telephone
answering device?