User Manual
Table Of Contents
- Quick Setup Guide MFC-9120CN
- Start Here
- 1 Unpack the machine and check the components
- 2 Remove the packing material from the machine
- 3 Install the drum unit and toner cartridge assemblies
- 4 Load paper in the paper tray
- 5 Connect the power cord and telephone line
- 6 Choose a Receive Mode
- 7 Choose your language (if needed)
- 8 Set The LCD contrast (if needed)
- 9 Set the date and time
- 10 Enter personal information (station ID)
- 11 Fax Transmission Report
- 12 Set tone or pulse dialling mode
- 13 Dial Prefix
- 14 Choose your connection type
- For USB Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®)
- For USB Interface Users (Mac OS X 10.3.9 or greater)
- For Wired Network Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®)
- For Wired Network Interface Users (Mac OS X 10.3.9 or greater)
- For Network Users
- Options and Consumables
- brother CHN-ENG
- Start Here
Options and Consumables
30
Options
The machine has the following optional accessory. You can expand the capabilities of the machine by adding this
item. For more information about compatible SO-DIMM Memory, visit us at http://solutions.brother.com/
.
When the time comes to replace consumable items, an error will be indicated by the LCD on the control panel. For
more information about the consumables for your machine, visit us at http://solutions.brother.com/
or contact your
local Brother reseller.
1
Contains a set of three colour drums and one black drum. All four drums are replaced at the same time.
For installing the SO-DIMM Memory, see the User's Guide or visit http://solutions.brother.com/.
SO-DIMM Memory
You can expand the memory by installing
a (144-pin SO-DIMM) memory module.
Toner cartridges Drum units
TN-270C/TN-270M/TN-270Y/TN-270BK
DR-270CL
1
Belt Unit (BU-200CL) Waste Toner Box (WT-200CL)