User Manual

Loading paper and documents
13
2
a Lift up the support flap (1) to prevent
paper from sliding off the face-down
output tray or remove each page as
soon as it comes out of the machine.
b Open the manual feed slot cover.
c Using both hands, slide the manual feed
slot paper guides to the width of the
paper that you are going to use.
d Using both hands, put one piece of
paper in the manual feed slot with the
print side face up until the front edge of
the paper touches the paper feed roller.
Wait until the machine automatically
feeds the paper. When you feel the
machine pull in the paper, let go.
Printing on thick paper, labels,
envelopes or small paper
2
When the back output tray is pulled down, the
machine has a straight paper path from the
manual feed slot through to the back of the
machine. Use this paper feed and output
method when you want to print on thick
paper, labels, envelopes, or paper that is
smaller than 105 × 148 mm (or A6 size).
Note
• Remove each printed sheet or envelope
immediately to prevent a paper jam.
• The machine automatically turns on the
Manual Feed mode when you put paper in
the manual feed slot.
1