User`s guide
Table Of Contents
- NETWORK USER’S GUIDE
- Table of Contents
- 1 Introduction
- 2 Configuring your machine for a network
- Overview
- IP addresses, subnet masks and gateways
- Step by step chart
- Setting the IP address and subnet mask
- Changing the print server settings
- Using the BRAdmin Light utility to change the print server settings
- Using the BRAdmin Professional 3 utility to change print server settings (Windows®)
- Using the control panel to change the print server settings
- Using Web Based Management (web browser) to change the print/scan server settings
- Using Remote Setup to change the print server settings (Not available for Windows Server® 2003/2008) (Not available for DCP-8085DN)
- Using other methods to change print server settings
- 3 Control panel setup
- 4 Driver Deployment Wizard (Windows® only)
- 5 Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
- 6 Internet printing for Windows®
- 7 Network printing from Macintosh using the BR-Script 3 driver
- 8 Web Based Management
- Overview
- How to configure the machine settings using Web Based Management (web browser)
- Password information
- Secure Function Lock 2.0 (Not available for MFC-8370DN)
- Changing the Scan to FTP configuration using a web browser
- Changing the Scan to Network configuration using a web browser
- Changing the LDAP configuration using a web browser (For MFC-8880DN)
- 9 LDAP operation (For MFC-8880DN)
- 10 Internet fax and Scan to E-mail (E-mail server) (For MFC-8880DN)
- Internet fax Overview
- Getting connected
- Control panel key functions
- Sending an Internet fax
- Manually entering text
- Receiving E-mail or Internet fax
- Receiving an Internet fax to your computer
- Forwarding received E-mail and fax messages
- Relay broadcasting
- TX Verification Mail
- Setup Mail TX
- Setup Mail RX
- Error mail
- Important information on Internet fax
- Scan to E-mail (E-mail server) overview
- Internet fax Overview
- 11 Security features
- 12 Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the TELNET console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS to configure the IP address
- Installation when using web services (Windows Vista®)
- Installation when using a Network Print Queue or Share (printer driver only)
- Appendix B
- Appendix C
- Index
Troubleshooting
120
12
Protocol-specific troubleshooting 12
Windows
®
2000/XP, Windows Vista
®
and Windows Server
®
2003/2008 IPP
troubleshooting 12
I want to use a different Port number other than 631. 12
If you are using Port 631 for IPP printing, you may find that your Firewall may not let the print data through.
If this is the case, use a different port number (port 80), or configure your Firewall to allow Port 631 data
through.
To send a print job using IPP to a printer using Port 80 (the standard HTTP port) enter the following when
configuring your Windows
®
2000/XP, Windows Vista
®
and Windows Server
®
2003/2008 system.
http://ipaddress/ipp/
The “Go to printer’s Web site” option in Windows
®
XP and Windows Vista
®
is not working
The “Get More Info” option in Windows
®
2000 and Windows Server
®
2003/2008 is not working 12
If you are using a URL of:
http://ipaddress:631/ or http://ipaddress:631/ipp/
the Get More Info option in Windows
®
2000/XP, Windows Vista
®
and Windows Server
®
2003/2008 will not
function. If you wish to use the Get More Info option, use the following URL:
http://ipaddress/
This will then force Windows
®
2000/XP, Windows Vista
®
and Windows Server
®
2003/2008 to use Port 80 to
communicate with the Brother print server.
Web Based Management (web browser) troubleshooting (TCP/IP) 12
a If you cannot connect to the print server using your web browser it may be worth checking the Proxy
Settings of your browser. Look in the Exceptions setting and if necessary, type in the IP address of the
print server. This will stop your computer from trying to connect to your ISP or proxy server every time
you wish to look at the print server.
b Make sure that you are using the correct web browser, we recommend Microsoft
®
Internet Explorer 6.0
®
(or greater) or Firefox 1.0 (or greater) for Windows
®
and Safari 1.3 for Macintosh. Please also make sure
that JavaScript and Cookies are always enabled in whichever browser you use. If a different web
browser is used, make sure it is compatible with HTTP 1.0 and HTTP 1.1.