User`s guide
Table Of Contents
- NETWORK USER’S GUIDE
- Table of Contents
- 1 Introduction
- 2 Configuring your machine for a network
- Overview
- IP addresses, subnet masks and gateways
- Step by step chart
- Setting the IP address and subnet mask
- Changing the print server settings
- Using the BRAdmin Light utility to change the print server settings
- Using the BRAdmin Professional 3 utility to change print server settings (Windows®)
- Using the control panel to change the print server settings
- Using Web Based Management (web browser) to change the print/scan server settings
- Using Remote Setup to change the print server settings (Not available for Windows Server® 2003/2008) (Not available for DCP-8085DN)
- Using other methods to change print server settings
- 3 Control panel setup
- 4 Driver Deployment Wizard (Windows® only)
- 5 Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
- 6 Internet printing for Windows®
- 7 Network printing from Macintosh using the BR-Script 3 driver
- 8 Web Based Management
- Overview
- How to configure the machine settings using Web Based Management (web browser)
- Password information
- Secure Function Lock 2.0 (Not available for MFC-8370DN)
- Changing the Scan to FTP configuration using a web browser
- Changing the Scan to Network configuration using a web browser
- Changing the LDAP configuration using a web browser (For MFC-8880DN)
- 9 LDAP operation (For MFC-8880DN)
- 10 Internet fax and Scan to E-mail (E-mail server) (For MFC-8880DN)
- Internet fax Overview
- Getting connected
- Control panel key functions
- Sending an Internet fax
- Manually entering text
- Receiving E-mail or Internet fax
- Receiving an Internet fax to your computer
- Forwarding received E-mail and fax messages
- Relay broadcasting
- TX Verification Mail
- Setup Mail TX
- Setup Mail RX
- Error mail
- Important information on Internet fax
- Scan to E-mail (E-mail server) overview
- Internet fax Overview
- 11 Security features
- 12 Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the TELNET console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS to configure the IP address
- Installation when using web services (Windows Vista®)
- Installation when using a Network Print Queue or Share (printer driver only)
- Appendix B
- Appendix C
- Index
Security features
93
11
Printing documents securely using IPPS 11
To print documents securely over the internet, you can use the IPPS protocol.
Note
• Communication using IPPS cannot prevent unauthorized access to the print server.
• IPPS is available for Windows
®
2000/XP, Windows Vista
®
and Windows Server
®
2003/2008.
To use the IPPS protocol, the following printer settings are required.
A certificate and private key must be installed in the printer. For how to install certificate and private key,
see Creating and installing a certificate on page 96.
The IPPS protocol must be enabled. To enable the IPPS protocol, enable
SSL communication is used (port 443) from the Advanced Setting page of IPP on the
Configure Protocol page. For information on how to access the Configure Protocol page, see
Configuring the protocol settings on page 89.
The basic steps for IPPS printing are the same as IPP printing. For detailed information, see Internet printing
for Windows
®
in Chapter 6.
Specifying a different URL 11
Please note that there are several possible entries that you can enter for the URL field.
https://Common Name/ipp/
This is the default URL and we recommend that you use this URL. Please note the Get More Info option will
not display any printer data.
https://Common Name/ipp/port1/
This is for HP Jetdirect compatibility. Please note the Get More Info option will not display any printer data.
Note
If you forget the URL details, you can simply enter the above text (https://Common Name/) and the
printer will still receive and process data.
Where “Common Name” is the Common Name that you assigned for the certificate, such as an IP address,
node name or domain name. (For how to assign a Common Name for the certificate, see Creating and
installing a certificate on page 96.)
• For example:
https://192.168.1.2/ (if the Common Name is the printer’s IP address.)