User Manual
Table Of Contents
- Network USER’S GUIDE
- Table of contents
- 1 Introduction
- 2 Configuring your network printer
- Overview
- IP addresses, subnet masks and gateways
- Setting the IP address and subnet mask
- Changing the print server settings
- 3 Control Panel Setup
- LAN Main Setup Menu
- Setup TCP/IP
- Ethernet
- Setup I-Fax (MFC-8860DN only)
- Setup Mail RX (MFC-8860DN only)
- Setup Mail TX (MFC-8860DN only)
- Setup Relay (MFC-8860DN only)
- Scan to E-mail (E-mail server) (MFC-8860DN only)
- Scan to FTP
- Fax to Server (MFC-8860DN only)
- Time Zone (MFC-8860DN only)
- Restoring the network settings to factory default
- Printing the Network Configuration List
- LAN Main Setup Menu
- 4 Network printing from Windows® basic TCP/IP Peer-to-Peer printing
- 5 Internet printing for Windows®
- Overview
- Quick Tips
- Brother Internet Print General Information
- Brother Internet Print: Configuring the Brother Print Server
- Brother Internet Print: Using the BRAdmin Professional utility to Configure the Print Server
- Brother Internet Print: Using a Web Browser to Configure the Print Server
- Brother Internet Print: Installing the BIP software on Windows® 98/Me/2000/XP and Windows NT® 4.0
- Adding a Second Brother Internet Port
- Windows® 2000/XP IPP printing
- Specifying a different URL
- Other sources of information
- Overview
- 6 Network printing from a Macintosh®
- 7 Web Based Management
- 8 LDAP Operation (MFC-8860DN only)
- 9 Internet FAX (MFC-8860DN only)
- Overview
- Getting Connected
- Control Panel Key Functions
- Sending an Internet Fax
- Manually Entering Text
- Receiving E-mail or Internet Fax
- Receiving an Internet Fax to a PC
- Forwarding Received E-mail and Fax Messages
- Relay Broadcasting
- TX Verification Mail
- Setup Mail (TX)
- Setup Mail (RX)
- Error mail
- Important information on Internet Fax
- Overview
- 10 Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and Administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the TELNET console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS* to configure the IP address
- Installation when using a Network Print Queue or Share (printer driver only)
- Multi-function Print Server specifications
- Function Table and Default Factory Settings
- Entering Text
- Index
Appendix A
76
A
Function Table and Default Factory Settings
LEVEL ONE LEVEL TWO LEVEL
THREE
LEVEL FOUR OPTIONS OPTIONS
6.LAN
(MFC-8460N
and
MFC-8860DN)
4.LAN
(DCP-8065DN)
1.Setup TCP/IP 1.BOOT
Method
Auto/ Static/ RARP/ BOOTP/ DHCP
2.IP Address [169].[254].[001-254].[000-255]
*1
3.Subnet
Mask
[255].[255].[000].[000]
*1
4.Gateway [000].[000].[000].[000]
5.Node Name BRN_XXXXXX=(last 6 figures of the
Ethernet address)
(up to 15 characters)
BRN_XXXXXX
6.WINS
Config
Auto/ Static
7.WINS
Server
(Primary)
[000].[000].[000].[000]
(Secondary)
[000].[000].[000].[000]
8.DNS Server (Primary)
[000].[000].[000].[000]
(Secondary)
[000].[000].[000].[000]
9.APIPA On/Off
0.IPv6 On/Off
2.Ethernet Auto/ 100B-FD/ 100B-HD/ 10B-FD/
10B-HD
3.Setup IFAX
(MFC-8860DN
only)
1.Setup
Internet
1.Mail Address (60 characters)
2.SMTP Server [000].[000].[000].[000] Name
(up to 30 characters)
3.POP3 Server [000].[000].[000].[000] Name
(up to 30 characters)
4.Mailbox Name (up to 20 characters)
5.Mailbox Pwd Password:****** Verify:******
2.Setup Mail
RX
1.Auto Polling On/ Off
2.Poll Frequency 10Min
3.Header All/ Suject+From+To/ None
4.Del Error Mail On/ Off
5.Notification On/ MDN/ Off
3.Setup Mail
TX
1.Sender Subject Internet Fax Job
2.Size Limit On/ Off
3.Notification On/ Off
4.Setup Relay 1.Rly Broadcast On/ Off