User Manual
Table Of Contents
- Network USER’S GUIDE
- Table of contents
- 1 Introduction
- 2 Configuring your network printer
- Overview
- IP addresses, subnet masks and gateways
- Setting the IP address and subnet mask
- Changing the print server settings
- 3 Control Panel Setup
- LAN Main Setup Menu
- Setup TCP/IP
- Ethernet
- Setup I-Fax (MFC-8860DN only)
- Setup Mail RX (MFC-8860DN only)
- Setup Mail TX (MFC-8860DN only)
- Setup Relay (MFC-8860DN only)
- Scan to E-mail (E-mail server) (MFC-8860DN only)
- Scan to FTP
- Fax to Server (MFC-8860DN only)
- Time Zone (MFC-8860DN only)
- Restoring the network settings to factory default
- Printing the Network Configuration List
- LAN Main Setup Menu
- 4 Network printing from Windows® basic TCP/IP Peer-to-Peer printing
- 5 Internet printing for Windows®
- Overview
- Quick Tips
- Brother Internet Print General Information
- Brother Internet Print: Configuring the Brother Print Server
- Brother Internet Print: Using the BRAdmin Professional utility to Configure the Print Server
- Brother Internet Print: Using a Web Browser to Configure the Print Server
- Brother Internet Print: Installing the BIP software on Windows® 98/Me/2000/XP and Windows NT® 4.0
- Adding a Second Brother Internet Port
- Windows® 2000/XP IPP printing
- Specifying a different URL
- Other sources of information
- Overview
- 6 Network printing from a Macintosh®
- 7 Web Based Management
- 8 LDAP Operation (MFC-8860DN only)
- 9 Internet FAX (MFC-8860DN only)
- Overview
- Getting Connected
- Control Panel Key Functions
- Sending an Internet Fax
- Manually Entering Text
- Receiving E-mail or Internet Fax
- Receiving an Internet Fax to a PC
- Forwarding Received E-mail and Fax Messages
- Relay Broadcasting
- TX Verification Mail
- Setup Mail (TX)
- Setup Mail (RX)
- Error mail
- Important information on Internet Fax
- Overview
- 10 Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and Administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the TELNET console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS* to configure the IP address
- Installation when using a Network Print Queue or Share (printer driver only)
- Multi-function Print Server specifications
- Function Table and Default Factory Settings
- Entering Text
- Index
Internet printing for Windows®
38
5
Brother Internet Print: Using a Web Browser to Configure the Print Server
1
Connect to the printer server IP address using your web browser.
2
When you reach the Network Configuration screen, you will be prompted for a User name and a
password. The default settings are User name “admin” and the password “access”.
3
Select the Configure POP3/SMTP option. Enter the address of the POP3 server (consult your Network
Administrator if you do not know this address). For more information, see Brother Internet Print: Using
the BRAdmin Professional utility to Configure the Print Server on page 37.
4
You should see a Segmented Message Timeout option. If a print job is separated into multiple E-mail
messages using the Partial E-mail Print feature of the BIP, this value indicates how long the print server
will wait for all of the segments of the message to arrive.
5
Select Submit to save the changes. Exit from the web browser. You have now configured the print server
to receive print jobs.
Brother Internet Print: Installing the BIP software on Windows
®
98/Me/2000/XP
and Windows NT
®
4.0
To install the BIP software on a Windows
®
98/2000/XP and Windows NT
®
4.0 PC, execute the following
steps:
Note
Be sure that the PC is running an E-mail program (for example, Microsoft Outlook) that is capable of sending
E-mail message using Winsock.
Be sure that your E-mail server is capable of sending messages across the Internet.
Setup from CD-ROM
1
Start the CD-ROM installation menu program according to the Quick Setup Guide.
2
Select the proper model and Install Optional Applications menu. Then select Network Print Software
installation program.
3
Click the Next button in response to the Welcome message.
4
Select the Brother Internet Print button.
5
Select the desired directory to install the BIP files and then click Next. The installation program will create
the directory for you if it does not already exist.
6
You will then be asked for a port name. Enter the name of the port. The port name must begin with the