User Manual
Table Of Contents
- Quick Setup Guide MFC-8460N/8860DN
- Getting Started
- Table of Contents
- Step1 Setting Up the machine
- Step2 Installing the Drivers & Software
- Supplied CD-ROM “MFL-Pro Suite”
- For USB Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition)
- For Parallel Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition)
- For Windows NT® Workstation Version 4.0 Users
- For Network Interface Cable Users (For Windows® 98/98SE/Me/NT/2000 Professional/XP/XP Professional x64 Edition)
- For USB Interface Cable Users
- For USB Interface Cable Users
- For Network Users and Administrators
- Options and Consumables
- Brother ENG
27
Make sure that you have finished the instructions from Step 1 “Setting Up
the machine” on pages 4 - 11.
1 Switch off the machine and disconnect the
machine from the power socket and from
the Macintosh
®
.
2 Turn on your Macintosh
®
.
3 Insert the supplied CD-ROM for Macintosh
®
into your CD-ROM drive.
4 Double-click the MFL-Pro SUite.
5 Follow the on-screen instructions, and
restart your Macintosh
®
.
6 After the Brother DeviceSelector window
appears, connect the network interface
cable to the machine, and then connect it to
a free port on your hub.
7 Plug in the power cord and turn on the
machine.
For Mac OS
®
X 10.2.4 or greater
The Brother DeviceSelector window will not
appear if you have also connected a USB
interface cable to the machine
before
restarting your Macintosh
®
or if you are
overwriting a previously installed version of
the Brother software. If you encounter this
problem continue with the installation skipping
Steps 9 to 11. You should then select your
Brother machine from the Model pull-down list
in the main screen of ControlCenter2. (For
details, see the software User’s Guide on CD-
ROM.)
Continued ...
Installing the Drivers & Software
Setting Up
the machine
Macintosh
®
Network
Network
Administrators