User Manual

7
Setting Up
the machine
Windows
®
USB
Windows
®
Parallel
Windows
NT
®
4.0
Parallel
Macintosh
®
USB
Macintosh
®
Network
Windows
®
Network
Network
Administrators
Warning
■ The machine must be fitted with an earthed plug.
■ Since the machine is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your machine when you connect it to a telephone
line. Similarly, you can protect yourself when you
want to move your machine by disconnecting the
telephone line first and then the power cord.
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
1
Check that the power is turned on by
plugging in the power cord and turn the
power switch on.
2
Press or to select the country
(AUSTRALIA or NEW Zealand).
Press OK when the LCD shows your
country.
3
The LCD prompts you to make sure of the
country again.
4
If the LCD shows the correct country, press
1 to go to Step
5
.
—OR—
Press 2 to go back to Step
2
to select the
country again.
5
After the LCD shows
Accepted
for two
seconds, it shows
Please Wait
.
If you are sharing one phone line with an
external telephone, connect it as shown
below.
If you are sharing one phone line with an
external telephone answering device,
connect it as shown below.
Please set the receive mode to External
TAD.
For more details, see “Connecting an
external TAD” in Chapter 7 of the User’s
Guide.
Extension
Telephone
External
Telephone
(Example
for Australia)
TAD
TAD
(Example
for Australia)
5
Set Your Country
(For Australia / New Zealand
Customer Only)
Set Country
a
Australia
b
NEW Zealand
Select
ab
& OK
Set Country
Australia
1.Yes
2.No
Enter Number