User Manual

Chapter 7
47
Turning on the remote codes 7
You need to turn the remote codes setting to
on to use the fax receive code and telephone
answer aode.
a Make sure you are in Fax mode .
b Press Menu 2, 1, 4.
21.Setup Receive
4.Remote Codes
a On
b Off
Select
ab & OK
c Press a or b to select On.
d If you don’t want to change the fax
receive code, press OK.
e If you don’t want to change the
telephone answer code, press OK.
f Press Stop/Exit.
Changing the remote codes 7
The preset fax receive code is l51. The
preset telephone answer code is #51. If you
are always disconnected when accessing
your external TAD, try changing the three
digit remote codes, for example ### and 555.
a Make sure you are in Fax mode .
b Press Menu 2, 1, 4.
21.Setup Receive
4.Remote Codes
a On
b Off
Select
ab & OK
c Press a or b to select On or Off.
Press OK.
d If you selected On in c, enter the new
fax receive code. Press OK.
e Enter the new telephone answer code.
Press OK.
f Press Stop/Exit.