User Manual

SETUP SEND 6 - 18
■
If the memory is full, press
Stop/Exit
to stop the job or if more
than one page has been scanned, press
Start
to send the
portion that is in the memory.
1
If it is not illuminated in green, press (
Fax
). Place the
document face up in the ADF, or face down on the scanner
glass.
2
Enter a number using One-Touch, Speed-Dial, a Group
number, Search or manual dialling using the dial pad.
(Example: Group number)
3
When the LCD displays the fax number of the other party,
press
Set
.
You will be asked to press the next number.
4
Enter the next number.
(Example: Speed-Dial number)
5
When the LCD displays the fax number of the other party,
press
Set
.
6
Enter another fax number.
(Example: Manual dialling using the dial pad.)
7
Press
Start
.
If you are using the scanner glass, go to Step 8.
8
To send a single page, press
2
(or press
Start
again).
The MFC starts sending the fax.
—OR—
To send more than one page, press
1
and go to Step 9.
9
Place the next page on the scanner glass.
Press
Set
.
The MFC starts scanning and returns to Step 8. (Repeat Step 8
and 9 for each additional page.)