User Manual

6 - 17 SETUP SEND
Using a printed cover page
If you prefer to use a printed cover page that you can write on, you
can print the sample page and attach it to your fax.
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu
,
2
,
2
,
7
.
3
Press or to select
Print Sample
.
Press
Set
.
4
Press
Start
. Your MFC prints a
copy of your cover page.
5
Press
Stop/Exit
.
Broadcasting
Broadcasting is when the same fax message is automatically sent to
more than one fax number. Using the
Set
key, you can include
Groups, One-Touch, Speed-Dial numbers and up to 50 manually
dialled numbers. If you did not use up any of the numbers for Groups,
access codes or credit card numbers, you can ‘broadcast’ faxes to
as many as 390 different numbers. However, the available memory
will vary depending on the types of jobs in the memory and the
number of locations used for broadcasting. If you broadcast to the
maximum numbers available, you will not be able to use Dual Access
and Delayed fax.
To include One-Touch or Speed-Dial numbers and manually dialled
numbers in the same broadcast, you must press
Set
between each
of the numbers. Use
Search/Speed Dial
to help you choose the
numbers easily.
(See Setting up Groups for Broadcasting on page 7-5.)
After the broadcast is finished, a Broadcast Report will be printed to
let you know the results.
■
Enter the long dialling sequence numbers as you would normally,
but remember that each One-Touch and Speed-Dial number
counts as one number, so the number of locations you can store
becomes limited.
22.Setup Send
7.Coverpg Setup
▲
Off
▼
Print Sample
Select
▲▼
& Set