User Manual

6 - 11 SETUP SEND
Real Time Transmission
When you are sending a fax, the MFC will scan the documents into
the memory before sending. Then, as soon as the phone line is free,
the MFC will start dialling and sending.
If the memory becomes full, the MFC will send the document in real
time (even if
Real Time TX
is set to
Off
).
Sometimes, you may want to send an important document
immediately, without waiting for memory transmission. You can set
Real Time TX
to
On
for all documents or for the next fax only.
If you want to fax multiple pages, use ADF.
1
If it is not illuminated in green, press (
Fax
). Place the
document face up in the ADF, or face down on the scanner
glass.
2
Press
Menu
,
2
,
2
,
5
.
3
To change the default setting,
press or to select
On
(or
Off
).
Press
Set
.
Go to Step 5.
—OR—
For the next fax transmission only, press or to select
Next Fax Only
.
Press
Set
.
4
Press or to select
Next Fax:On
(or
Next
Fax:Off
).
Press
Set
.
22.Setup Send
5.Real Time TX
▲
Next Fax Only
▼
On
Select
▲▼
& Set