Datasheet

TROUBLESHOOTING AND ROUTINE MAINTENANCE 12 - 3
Not
Registered
You tried to access a One-Touch or
Speed-Dial number that is not programmed.
Set up the One-Touch or Speed-Dial
number. (See Storing One-Touch
Dial numbers on page 7-1 and
Storing Speed-Dial numbers on
page 7-3.)
Out of Memory You can’t store data in the memory. (Fax sending in process)
Press Stop/Exit and wait until the
other operations in progress finish
and then try again.
—OR—
Clear the data in the memory.
(See Out of Memory message on
page 10-5.)
(Copy operation in process)
Press Stop/Exit and wait until the
other operations in process finish
and then try again.
—OR—
Clear the data in the memory.
(See Out of Memory message on
page 10-5.)
—OR—
Add an optional memory.
(See Memory board on page 13-1.)
(Printing operation in process)
Reduce print resolution. (See Print
Quality in Software User’s Guide on
the CD-ROM.)
—OR—
Clear the data in the memory.
See Out of Memory message on
page 10-5.)
—OR—
Add an optional memory.
(See Memory board on page 13-1.)
Paper Jam The paper is jammed in the MFC. See Paper jams on page 12-6 and
Paper is jammed in the duplex tray
(For MFC-8840D) on page 12-10.
ERROR MESSAGES
ERROR
MESSAGE
CAUSE ACTION