User Guide

38
5
How to fax 5
Entering fax mode 5
To enter fax mode press (Fax), and the
key will glow blue.
Sending a single-sided fax
from the ADF 5
Using the ADF to send your faxes is the
easiest way. To cancel a fax in progress
press Stop/Exit.
a Make sure you are in Fax mode .
b Place your document face up in the
ADF.
c Dial the fax number. (See How to dial
on page 63.)
d Press Start.
The machine scans the pages into
memory and then sends the document.
Note
If the Out of Memory message appears
while scanning a document into memory,
press Stop/Exit to cancel or Start to send
the scanned pages.
Sending a 2-sided fax from
the ADF (MFC-8680DN,
MFC-8690DW and
MFC-8890DW) 5
You can send a 2-sided document from the
ADF. To cancel a fax in progress press
Stop/Exit.
a Make sure you are in Fax mode .
b Place your document in the ADF.
c Press Duplex.
d Dial the fax number. (See How to dial
on page 63.)
e Press Start.
The machine will now scan and send your
document.
Note
• Legal size 2-sided documents cannot be
faxed from the ADF.
• When the machine is ready to scan a
2-sided document the LCD shows for
Duplex in the lower right corner.
Sending a fax 5