User Manual
Table Of Contents
- NETWORK USER’S GUIDE
- Table of Contents
- 1 Introduction
- 2 Configuring your machine for a network
- Overview
- IP addresses, subnet masks and gateways
- Step by step chart
- Setting the IP address and subnet mask
- Changing the print server settings
- Using the BRAdmin Light utility to change the print server settings
- Using the BRAdmin Professional 3 utility to change print server settings (Windows®)
- Using the control panel to change the print server settings
- Using Web Based Management (web browser) to change the print/scan server settings
- Using Remote Setup to change the print server settings (Not available for Windows Server® 2003/2008) (Not available for DCP-8085DN and DCP-8080DN)
- Using other methods to change print server settings
- 3 Configuring your machine for a wireless network (For MFC-8890DW)
- Overview
- Wireless network terms and concepts
- Step by step chart for wireless network configuration
- Confirm your network environment
- Confirm your wireless network setup method
- Configuration using the machine’s control panel Setup Wizard to configure your machine for a wireless network
- Configuration using the SES/WPS or AOSS™ control panel menu (Automatic Wireless mode) (Infrastructure mode only)
- Configuration using the PIN Method of Wi-Fi Protected Setup (Infrastructure mode only)
- Configuration using the Brother installer application on the CD-ROM to configure your wireless network machine
- Configure your machine for a wireless network
- Using the Setup Wizard from the control panel
- Using the SES/WPS or AOSS™ control panel menu to configure your machine for a wireless network (Automatic Wireless mode)
- Using the PIN Method of Wi-Fi Protected Setup
- Using the Brother installer application on the CD-ROM to configure your machine for a wireless network
- 4 Wireless configuration for Windows® using the Brother installer application (For MFC-8890DW)
- 5 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW)
- 6 Control panel setup
- Network menu
- TCP/IP
- Ethernet (wired network only)
- Setup Wizard (MFC-8890DW wireless network only)
- SES/WPS or AOSS™ (MFC-8890DW wireless network only)
- WPS w/PIN Code (MFC-8890DW wireless network only)
- WLAN Status (MFC-8890DW wireless network only)
- Set to Default (MFC-8890DW only)
- Wired Enable (MFC-8890DW wired network only)
- WLAN Enable (MFC-8890DW wireless network only)
- E-mail / IFAX (MFC-8880DN and MFC-8890DW only)
- How to set a new default for Scan to E-mail (E-mail server) (MFC-8880DN and MFC-8890DW only)
- How to set a new default for Scan to FTP
- How to set a new default for Scan to Network
- Fax to Server (For MFC-8880DN and MFC-8890DW)
- Time Zone
- Restoring the network settings to factory default
- Printing the Network Configuration List
- Network menu
- 7 Driver Deployment Wizard (Windows® only)
- 8 Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
- 9 Internet printing for Windows®
- 10 Network printing from Macintosh using the BR-Script 3 driver
- 11 Web Based Management
- Overview
- How to configure the machine settings using Web Based Management (web browser)
- Password information
- Secure Function Lock 2.0 (Not available for MFC-8370DN)
- Changing the Scan to FTP configuration using a web browser
- Changing the Scan to Network configuration using a web browser
- Changing the LDAP configuration using a web browser (For MFC-8880DN and MFC-8890DW)
- 12 LDAP operation (For MFC-8880DN and MFC-8890DW)
- 13 Internet fax and Scan to E-mail (E-mail server) (For MFC-8880DN and MFC-8890DW)
- Internet fax Overview
- Getting connected
- Control panel key functions
- Sending an Internet fax
- Manually entering text
- Receiving E-mail or Internet fax
- Receiving an Internet fax to your computer
- Forwarding received E-mail and fax messages
- Relay broadcasting
- TX Verification Mail
- Setup Mail TX
- Setup Mail RX
- Error mail
- Important information on Internet fax
- Scan to E-mail (E-mail server) overview
- Internet fax Overview
- 14 Security features
- Overview
- Configuring the protocol settings
- Managing your network printer securely
- Printing documents securely using IPPS
- Using E-mail notification with user authentication (For MFC-8880DN and MFC-8890DW)
- Creating and installing a certificate
- 15 Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the TELNET console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS to configure the IP address
- Installation when using web services (Windows Vista®)
- Installation when using a Network Print Queue or Share (printer driver only)
- Appendix B
- Appendix C
- Index
141
11
11
Overview 11
A standard Web Browser can be used to manage your machine using the HTTP (Hyper Text Transfer
Protocol). You can get the following information from a machine on your network using a web browser.
Printer status information
Change Fax configuration items, such as General Setup, Quick-Dial settings and Remote Fax
Change network settings such as TCP/IP information.
Configure Secure Function Lock 2.0
Configure Scan to FTP
Configure Scan to Network
Configure LDAP
Software version information of the machine and print server
Change network and machine configuration details
Note
We recommend Microsoft
®
Internet Explorer
®
6.0 (or greater) or Firefox 1.0 (or greater) for Windows
®
and
Safari 1.3 (or greater) for Macintosh. Please also make sure that JavaScript and Cookies are always
enabled in whichever browser you use. If a different web browser is used, make sure it is compatible with
HTTP 1.0 and HTTP 1.1.
You must use the TCP/IP protocol on your network and have a valid IP address programmed into the print
server and your computer.
Note
• To learn how to configure the IP address on your machine, see Configuring your machine for a network
on page 12.
• You can use a web browser on most computing platforms, for example, Macintosh and UNIX users are
also able to connect to the machine and manage it.
• You can also use the BRAdmin applications to manage the printer and its network configuration.
• This print server also supports HTTPS for secure management using SSL. (See Managing your network
printer securely on page 167.)
Web Based Management 11