User Manual

Network Scanning (For models with built-in network support)
207
11
Scan to Network (Not available for DCP-8070D) 11
When you choose Scan to Network, you can scan a black and white or colour document directly to a CIFS
server on your local network or on the internet. (For more information about CIFS severs, see the Network
User’s Guide.)
The details required to use Scan to Network can be entered by using Web Based Management to pre-
configure and store the details in a Scan to Network profile. A Scan to Network profile stores user information
and configuration settings for use on a network, or the internet.
Note
Scan to Network is available when Scan to Network profiles are configured by using Web Based
Management.
To use Web Based Management, type http://xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP address of
your machine) into your browser, and then you can configure or change the settings in
FTP/Network Scan Profile in Administrator Settings. You can configure up to ten Scan to Network profiles
and you can choose what profile numbers (1 to 10) to use for Scan to Network settings in
FTP/Network Scan Settings.
In addition to the seven preset file names you can store two user defined file names that can be used for
creating a Scan to Network profile.
Choose FTP/Network Scan Profile Settings in Web Based Management. In
Create a User Defined File Name, enter a file name in one of the two user defined fields and click Submit.
A maximum of 15 characters can be entered in each of the user defined name fields.