User Manual

Network Scanning (For models with built-in network support)
205
11
Scan to FTP using FTP Server Profiles 11
a Load your document.
b Press (Scan).
c Press a or b to choose Scan to FTP.
Press OK.
If your machine does not support Duplex Scan, go to step e.
If your machine supports Duplex Scan, go to step d.
d Press a or b to choose 1sided, 2sided (L)edge or 2sided (S)edge.
Press OK.
e Press a or b to choose one of the FTP server profiles listed.
Press OK.
f If you check Use PIN for authentication in FTP/Network Scan Profile of Web Based Management,
the LCD will prompts you to enter a PIN number. Enter the 4-digit PIN number and then press OK.
 If the profile is complete, you will automatically go to step j.
 If the profile is not complete, for instance, the quality or file type are not chosen, you will be prompted
to enter any missing information in the following steps.
g Choose one of the options below:
 Press a or b to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi or Gray 300 dpi.
Press OK and go to step h.
 Press a or b to choose B&W 200 dpi or B&W 200x100 dpi.
Press OK and go to step i.
h Press a or b to choose PDF, Secure PDF or JPEG.
Press OK and go to step j.
i Press a or b to choose PDF, Secure PDF or TIFF.
Press OK.
Note
If you choose Secure PDF, the machine will ask you to enter a four-digit password using numbers 1-9
before it starts scanning.
j Do one of the following:
 If you want to start scanning, press Start and go to step m.
 If you want to change the file name, go to step k.
k Press a or b to choose a file name you want to use and press OK.
Press Start and go to step m.