User Manual

Network Scanning (For models with built-in network)
96
4
g If you want to protect the profile, check Use PIN for authentication and enter a 4-digit PIN number in
PIN Code.
h Choose the authentication method. You can choose Auto, Kerberos or NTLMv2.
If you choose Auto the authentication method will be detected automatically.
i Enter the Username that has been registered with the CIFS server for the machine (up to 32 characters).
j Enter the Password for access to the CIFS server (up to 32 characters).
k If you want to set Kerberos Server Address manually, enter the Kerberos Server Address (for example
/brother/abc/) (up to 60 characters).
Scan to Network using Scan to Network Profiles 4
a Load your document.
b Press (Scan).
c Press a or b to choose Scan to Network or ScanTo Network. Press OK.
d Press a or b to choose 1sided, 2sided (L)edge or 2sided (S)edge.
Press OK.
e Press a or b to choose one of the profiles listed. Press OK.
f If you check Use PIN for authentication in FTP/Network Scan Profile of Web Based Management,
the LCD will prompts you to enter a PIN number. Enter the 4-digit PIN number and then press OK.
 If the profile is complete, you will automatically go to step j.
 If the profile is not complete, for instance, the quality or file type are not chosen, you will be prompted
to enter any missing information in the following steps.
g Choose one of the options below:
 Press a or b to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi or Gray 300 dpi. Press OK and go to step h.
 Press a or b to choose B&W 200 dpi or B&W 200x100 dpi. Press OK and go to step i.
h Press a or b to choose PDF, Secure PDF, JPEG or XPS.
Press OK, and go to step j.
i Press a or b to choose PDF, Secure PDF or TIFF. Press OK.
Note
If you choose Secure PDF, the machine will ask you to enter a four-digit password using numbers 1-9
before it starts scanning.