User Manual
Table Of Contents
- USER’S GUIDE MFC-440CN/MFC-665CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I:General
- 1 General Information
- 2 Loading documents and paper
- 3 General setup
- 4 Security features
- Section II:Fax
- 5 Sending a fax
- Entering Fax mode
- Broadcasting (Monochrome only)
- Additional sending operations
- Sending faxes using multiple settings
- Contrast
- Changing fax resolution
- Dual access (Monochrome only)
- Real time transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Setting your changes as a new default
- Restoring all settings to the factory settings
- Sending a fax manually
- Sending a fax at the end of a conversation
- Out of Memory message
- 6 Receiving a Fax
- 7 Telephone Services and External devices
- Voice operations
- Phone line services
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension phones
- 8 Dialling and storing numbers
- 9 Digital TAD (MFC-665CW only)
- 10 Advanced fax operations (Monochrome only)
- 11 Printing Reports
- 12 Polling
- 5 Sending a fax
- Section III:Copy
- 13 Making copies
- How to copy
- Copy settings
- ‘Out of Memory’ message
- 13 Making copies
- Section IV:Direct Photo Printing
- Section V:Software
- Section VI:Appendixes
- A:Safety and Legal
- B:Troubleshooting and Routine Maintenance
- Troubleshooting
- Error messages
- Routine maintenance
- Replacing the ink cartridges
- Cleaning the outside of the machine
- Cleaning the scanner
- Cleaning the machine printer platen
- Cleaning the paper pick-up roller
- Cleaning the print head
- Checking the print quality
- Checking the printing alignment
- Checking the ink volume
- Uninstalling the handset and handset cradle (MFC-665CW only)
- Machine Information
- Packing and shipping the machine
- C:Menu and Features
- D:Specifications
- E:Glossary
- Index
- brother ARL/ASA/NZ
Loading documents and paper
19
2
If you have problems when printing on
envelopes, try the following suggestions:
2
a Open the envelope flap.
b Make sure the open flap is either to the
side of the envelope or to the back edge
of the envelope when printing.
c Adjust the size and margin in your
application.
Loading photo paper 2
Use the photo paper tray, which has been
assembled on the top of the output paper tray
cover, to print on photo 10×15 cm and photo
L size paper. You can leave paper in the
standard paper tray when using the photo
paper tray.
a Press the tray release button with your
left thumb and push the photo paper tray
(the top part of the tray) backward until it
clicks into the photo printing position.
1 Photo Paper Tray
b Press and slide the paper side
guides (1) and paper length guide (2) to
fit the paper size.
1
1
2