User Manual
Table Of Contents
- USER’S GUIDE MFC-440CN/MFC-665CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I:General
- 1 General Information
- 2 Loading documents and paper
- 3 General setup
- 4 Security features
- Section II:Fax
- 5 Sending a fax
- Entering Fax mode
- Broadcasting (Monochrome only)
- Additional sending operations
- Sending faxes using multiple settings
- Contrast
- Changing fax resolution
- Dual access (Monochrome only)
- Real time transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Setting your changes as a new default
- Restoring all settings to the factory settings
- Sending a fax manually
- Sending a fax at the end of a conversation
- Out of Memory message
- 6 Receiving a Fax
- 7 Telephone Services and External devices
- Voice operations
- Phone line services
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension phones
- 8 Dialling and storing numbers
- 9 Digital TAD (MFC-665CW only)
- 10 Advanced fax operations (Monochrome only)
- 11 Printing Reports
- 12 Polling
- 5 Sending a fax
- Section III:Copy
- 13 Making copies
- How to copy
- Copy settings
- ‘Out of Memory’ message
- 13 Making copies
- Section IV:Direct Photo Printing
- Section V:Software
- Section VI:Appendixes
- A:Safety and Legal
- B:Troubleshooting and Routine Maintenance
- Troubleshooting
- Error messages
- Routine maintenance
- Replacing the ink cartridges
- Cleaning the outside of the machine
- Cleaning the scanner
- Cleaning the machine printer platen
- Cleaning the paper pick-up roller
- Cleaning the print head
- Checking the print quality
- Checking the printing alignment
- Checking the ink volume
- Uninstalling the handset and handset cradle (MFC-665CW only)
- Machine Information
- Packing and shipping the machine
- C:Menu and Features
- D:Specifications
- E:Glossary
- Index
- brother ARL/ASA/NZ
Printing photos from a memory card
107
14
PhotoCapture Center™ print settings 14
You can change the print settings temporarily for the next printing.
The machine returns to its default settings 180 seconds, or if the Mode Timer returns the machine
to Fax mode. (See Mode Timer on page 23.)
Note
You can save the print settings you use most often by setting them as default. (See Setting
your changes as a new default on page 110.)
1 No of prints
(For View Photo(s))
You can see the total number of photos that will be printed.
(For Print All Photos, Print Photos)
You can see the number of copies of each photo that will be printed.
Menu Selections Option 1 Option 2 Page
Print Quality Normal/Photo — 108
Paper Type Plain Paper/Inkjet Paper/
Brother Photo/Other Photo
— 108
Paper Size Letter/A4/10x15cm/13x18cm (When A4 or Letter is chosen)
10x8cm/13x9cm/15x10cm/
18x13cm/20x15cm/Max. Size
108
Brightness — 109
Contrast — 109
Color Enhance On/Off
White Balance /
Sharpness /
Color Density
Exit
— 109
Cropping On/Off — 110
Borderless On/Off — 110
Set New Default Yes/No — 110
Factory Reset Yes/No — 110
PHOTO
Paper Type
Paper Size
Brightness
Contrast
Other Ph
Print Quality Photo
10x15 cm
0
0
Print Start Press
0001
1
Dark Ligh
t