User's Guide
Table Of Contents
- USER'S GUIDE MFC-8220
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Loading paper and original documents
- 3 On-screen programming
- 4 Getting started
- Initial Setup
- General Setup
- Setting the Mode Timer
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Turning on Automatic Daylight Savings Time
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Setting the Tray Use for Copy mode
- Setting the Tray Use for Fax mode
- 5 Setup Receive
- 6 Setup Send
- 7 Auto Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used only in the United States.
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- For your safety
- Disconnect device
- Laser safety
- FDA regulations
- Important safety instructions
- Trademarks
- Shipment of the MFC
- 12 Troubleshooting and routine maintenance
- 13 Optional accessories
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother USA/CAN
12 - 19 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Packing and shipping the MFC
Whenever you transport the MFC, use the packing materials that
came with your machine. If you do not pack the MFC correctly, you
may void your warranty.
1
Turn the MFC power switch off.
2
Unplug the MFC from the telephone wall jack.
3
Unplug the MFC from the AC power outlet.
4
Unplug the parallel and USB cable from the MFC, if it is
connected.
5
Open the front cover.
6
Remove the drum unit and toner cartridge assembly. Leave the
toner cartridge installed in the drum unit.