User Manual
Table Of Contents
- USER’S GUIDE MFC-790CW MFC-990CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I: General
- 1 General Information
- 2 Loading paper and documents
- 3 General setup
- 4 Security features
- Section II: Fax
- 5 Sending a Fax
- Entering Fax mode
- Broadcasting (Monochrome only)
- Additional sending operations
- Sending faxes using multiple settings
- Contrast
- Changing fax resolution
- Dual access (Monochrome only)
- Real time transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Setting your changes as a new default
- Restoring all settings to the factory settings
- Sending a fax manually
- Sending a fax at the end of a conversation
- Out of Memory message
- 6 Receiving a Fax
- 7 Telephone and External devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 8 Dialling and storing numbers
- 9 Digital TAD
- 10 Printing Reports
- 11 Polling
- 5 Sending a Fax
- Section III: Copy
- Section IV: Direct Photo Printing
- 13 Printing photos from a memory card or USB Flash memory drive
- 14 Printing photos from a camera
- 15 Wireless photo printing (MFC-990CW only)
- Section V: Software
- Section VI: Appendixes
- A Safety and Legal
- B Troubleshooting and Routine Maintenance
- Troubleshooting
- Error and Maintenance messages
- Routine maintenance
- Replacing the ink cartridges
- Cleaning the outside of the machine
- Cleaning the scanner glass
- Cleaning the machine’s printer platen
- Cleaning the paper pick-up roller
- Cleaning the print head
- Checking the print quality
- Checking the print alignment
- Checking the ink volume
- Uninstalling and installing the handset and handset cradle (MFC-790CW only)
- Machine Information
- Packing and shipping the machine
- C Menu and Features
- D Specifications
- E Glossary
- Index
- brother ARL/ASA/NZ
Chapter 2
20
Paper weight, thickness and capacity 2
1
Up to 100 sheets of 80 gsm paper.
2
For Photo 10×15 cm paper and Photo L paper, use the photo paper tray. (See Loading photo paper on page 14.)
3
BP71 (260 gsm) paper is especially designed for Brother inkjet machines.
Paper Type Weight Thickness No. of
sheets
Cut
Sheet
Plain Paper
64 to 120 gsm
0.08 to 0.15 mm
100
1
Inkjet Paper
64 to 200 gsm
0.08 to 0.25 mm 20
Glossy Paper
Up to 220 gsm
Up to 0.25 mm
20
23
Cards Photo Card
Up to 220 gsm
Up to 0.25 mm
20
23
Index Card
Up to 120 gsm
Up to 0.15 mm 30
Postcard
Up to 200 gsm
Up to 0.25 mm 30
Envelopes
75 to 95 gsm
Up to 0.52 mm 10
Transparencies – – 10