User Manual
Table Of Contents
- USER’S GUIDE MFC-790CW MFC-990CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I: General
- 1 General Information
- 2 Loading paper and documents
- 3 General setup
- 4 Security features
- Section II: Fax
- 5 Sending a Fax
- Entering Fax mode
- Broadcasting (Monochrome only)
- Additional sending operations
- Sending faxes using multiple settings
- Contrast
- Changing fax resolution
- Dual access (Monochrome only)
- Real time transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Setting your changes as a new default
- Restoring all settings to the factory settings
- Sending a fax manually
- Sending a fax at the end of a conversation
- Out of Memory message
- 6 Receiving a Fax
- 7 Telephone and External devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 8 Dialling and storing numbers
- 9 Digital TAD
- 10 Printing Reports
- 11 Polling
- 5 Sending a Fax
- Section III: Copy
- Section IV: Direct Photo Printing
- 13 Printing photos from a memory card or USB Flash memory drive
- 14 Printing photos from a camera
- 15 Wireless photo printing (MFC-990CW only)
- Section V: Software
- Section VI: Appendixes
- A Safety and Legal
- B Troubleshooting and Routine Maintenance
- Troubleshooting
- Error and Maintenance messages
- Routine maintenance
- Replacing the ink cartridges
- Cleaning the outside of the machine
- Cleaning the scanner glass
- Cleaning the machine’s printer platen
- Cleaning the paper pick-up roller
- Cleaning the print head
- Checking the print quality
- Checking the print alignment
- Checking the ink volume
- Uninstalling and installing the handset and handset cradle (MFC-790CW only)
- Machine Information
- Packing and shipping the machine
- C Menu and Features
- D Specifications
- E Glossary
- Index
- brother ARL/ASA/NZ
Wireless photo printing (MFC-990CW only)
123
15
Paper Size 15
a Press MENU.
b Press a or b to display Bluetooth.
c Press Bluetooth.
d Press a or b to display
Print Settings.
e Press Print Settings.
f Press a or b to display Paper Size.
g Press Paper Size.
h Press 10x15cm, Letter, 13x18cm or
A4.
i Press Stop/Exit.
Borderless 15
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a Press MENU.
b Press a or b to choose Bluetooth.
c Press Bluetooth.
d Press a or b to display
Print Settings.
e Press Print Settings.
f Press a or b to display Borderless.
g Press Borderless.
h Press On (or Off).
i Press Stop/Exit.
Date Print 15
You can print the date if it is already in the
data on your photo. The date will be printed
on the lower right corner. If the photo data
does not have the date information, you
cannot use this function.
a Press MENU.
b Press a or b to display Bluetooth.
c Press Bluetooth.
d Press a or b to display
Print Settings.
e Press Print Settings.
f Press a or b to display Date Print.
g Press Date Print.
h Press On (or Off).
i Press Stop/Exit.
Restoring all settings to the
factory settings 15
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a Press MENU.
b Press a or b to display Bluetooth.
c Press Bluetooth.
d Press a or b to display
Factory Reset.
e Press Factory Reset.
f Press Yes (or No).
g Press Stop/Exit.