User Manual

90
12
How to copy 12
Entering Copy mode 12
When you want to make a copy, press
(Copy) to illuminate it in blue.
The LCD shows:
1 No. of Copies
Press the number box directly and enter the
number you want.
Also you can enter the number of copies by
pressing or on the screen (as shown
above).
Press d or c to scroll through the copy
options. Press the option that you want to set.
 Quality (See page 91.)
 Enlarge/Reduce (See page 92.)
 Paper Type (See page 94.)
 Paper Size (See page 95.)
 Brightness (See page 94.)
 Contrast (See page 94.)
 Stack/Sort (See page 94.)
 Page Layout (See page 93.)
 Book Copy (See page 95.)
 Watermark Copy (See page 95.)
 Favorite Settings (See page 96.)
Note
• The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode Timer
on page 25.)
• Book Copy and Watermark Copy
features are supported by technology
from Reallusion, Inc.
Making a single copy 12
a Press (Copy).
b Load your document.
(See Loading documents on page 21.)
c Press Mono Start for B&W copy or
Colour Start for colour copy.
Making multiple copies 12
You can make up to 99 copies in one print
run.
a Press (Copy).
b Load your document.
(See Loading documents on page 21.)
c Enter the number of copies you want.
d Press Mono Start for B&W copy or
Colour Start for colour copy.
Note
To sort the copies, press d or c to choose
Stack/Sort. (See Sorting copies using
the ADF on page 94.)
Stop copying 12
To stop copying, press Stop/Exit.
Making copies 12
Normal
Normal
100%
100%
Plain Paper
Plain Paper
COPY
COPY
Quality Paper Type
Favorite
Enlarge/
Reduce
1