Network User's Guide for Internet Fax

Internet fax
2
1
Control panel key functions 1
Shift + 1 1
Used to change input mode. You can use dial pad keys as Standard alphabet character keys.
Dial Pad
1
Used to enter Standard Alpha characters (26 letters), as well as @. space ! “ # % & ’ () + / : ; < > = ? [ ] ^ - $
, l _ and Numbers.
d or c
1
Moves the LCD cursor to the left or right when you enter text.
OK
1
Used to store multiple numbers.
Start
1
Begins transmitting the document.
Stop/Exit
1
Deletes entered data and stops the scanning or transmitting process.
One Touch
Search/Speed-Dial
1
These functions work the same way as with conventional machine’s.
However, please note that you cannot use chain dialing for E-mail address.
Shift + Start
1
Used to receive E-mail from the POP3 server manually.
Sending an Internet fax 1
Sending an Internet fax is the same as sending a normal fax. If you have already programmed the addresses
of the destination Internet fax machines as One Touch or Speed-Dial locations, you can send the Internet fax
by loading the document into the machine, use the Fax Resolution key to set the preferred resolution and
choose a Speed Dial or One Touch number and press Start.
If you wish to manually enter the Internet fax address, load the document into the machine and press Shift
and 1 simultaneously to change into the “alphabet” dialing mode.
To manually enter the Internet fax address, see Entering Text on page 58.