Network User's Guide for Internet Fax
Table Of Contents
- NETWORK USER’S GUIDE MFC-7440N MFC-7840N MFC-7840W
- Table of Contents
- 1 Internet fax
- Overview
- Getting connected
- Control panel key functions
- Sending an Internet fax
- Manually entering text
- Receiving E-mail or Internet fax
- Receiving an Internet fax to your computer
- Forwarding received E-mail and fax messages
- Relay broadcasting
- TX Verification Mail
- Setup Mail TX
- Setup Mail RX
- Error mail
- Important information on Internet fax
- Overview
- 2 Fax operation
- 3 Control panel setup
- LAN menu
- TCP/IP
- Ethernet (wired network only)
- Setup Wizard (MFC-7840W wireless network only)
- SES/WPS/AOSS (MFC-7840W wireless network only)
- WPS w/PIN Code (MFC-7840W wireless network only)
- WLAN Status (MFC-7840W wireless network only)
- Set to Default (MFC-7840W only)
- Wired Enable (MFC-7840W wired network only)
- WLAN Enable (MFC-7840W wireless network only)
- Setup Internet (from the Setup IFAX menu)
- Setup Mail RX (from the Setup IFAX menu)
- Setup Mail TX (from the Setup IFAX menu)
- Setup Relay (from the Setup IFAX menu)
- Scan to E-mail (E-mail server)
- Scan to FTP
- Fax to Server
- Time Zone
- Restoring the network settings to factory default
- Printing the Network Configuration List
- LAN menu
- Appendix A
- Index
Fax operation
13
2
Broadcasting 2
Broadcasting lets you send the same fax message to more than one fax number. You can include Groups,
One Touch, Speed Dial numbers and up to 50 manually dialed numbers in the same broadcast.
You can broadcast up to 258 different numbers. This will depend on how many groups, access codes or credit
card numbers you have stored, and on how many delayed or stored faxes are in memory.
Note
Use the Search/Speed Dial to help you choose numbers easily.
a Make sure you are in Fax mode .
b Load your document.
c Enter a number.
Press OK.
You can use either a One Touch, Speed Dial, a Group number, or a number manually entered using the
dial pad.
d Repeat c until you have entered all the fax numbers you want to broadcast to.
e Press Start.
After the broadcast is finished the machine will print a broadcast report to let you know the results.
Note
• You can only send to IFAX numbers in Standard, Fine or Photo resolution.
• The scan profile of the One Touch, Speed Dial, a Group number you choose first will be applied to the
broadcast.
• If the fax resolution of the fax number you choose first is S.Fine and you enter a stored IFAX number,
Select Std/Fine will appear on the LCD. Press Stop/Exit. Press Resolution and choose Standard,
Fine or Photo, then re-enter the IFAX number. If you want to enter other numbers, go back to c.