User`s guide
Table Of Contents
- NETWORK USER’S GUIDE MFC-7440N MFC-7840N MFC-7840W
- Table of Contents
- 1 Internet fax
- Overview
- Getting connected
- Control panel key functions
- Sending an Internet fax
- Manually entering text
- Receiving E-mail or Internet fax
- Receiving an Internet fax to your computer
- Forwarding received E-mail and fax messages
- Relay broadcasting
- TX Verification Mail
- Setup Mail TX
- Setup Mail RX
- Error mail
- Important information on Internet fax
- Overview
- 2 Fax operation
- 3 Control panel setup
- LAN menu
- TCP/IP
- Ethernet (wired network only)
- Setup Wizard (MFC-7840W wireless network only)
- SES/WPS/AOSS (MFC-7840W wireless network only)
- WPS w/PIN Code (MFC-7840W wireless network only)
- WLAN Status (MFC-7840W wireless network only)
- Set to Default (MFC-7840W only)
- Wired Enable (MFC-7840W wired network only)
- WLAN Enable (MFC-7840W wireless network only)
- Setup Internet (from the Setup IFAX menu)
- Setup Mail RX (from the Setup IFAX menu)
- Setup Mail TX (from the Setup IFAX menu)
- Setup Relay (from the Setup IFAX menu)
- Scan to E-mail (E-mail server)
- Scan to FTP
- Fax to Server
- Time Zone
- Restoring the network settings to factory default
- Printing the Network Configuration List
- LAN menu
- Appendix A
- Index
Fax operation
15
2
h You can save a fax/scan resolution along with the number. Do one of the following:
If you chose Fax/IFAX in d, press a or b to choose Std, Fine, S.Fine or Photo.
Press OK and then go to j.
If you chose E-Mail in d, press a or b to choose Color150dpi, Color300dpi, Color600dpi,
Gray100dpi, Gray200dpi, Gray300dpi, B&W200dpi (B/W200dpi) or B&W200x100
(B/W200x100).
Press OK and then go to i.
Press OK if you don’t want to change the default resolution. Go to j.
Note
If you have chosen Fax/IFAX in d and added One Touch or Speed Dial numbers that are stored as
‘IFAX’, you cannot chose S.Fine.
i Choose one of the options below:
If you chose Color150dpi, Color300dpi, Color600dpi, Gray100dpi, Gray200dpi or
Gray300dpi in h, choose the file format (PDF or JPEG) that will be used to send your PC.
If you chose B&W200dpi (B/W200dpi) or B&W200x100 (B/W200x100) in h, choose the file format
(TIFF or PDF) that will be used to send to your PC.
Press OK.
j Do one of the following:
To store another group for broadcasting. Go to b.
To finish storing groups for broadcasting, press Stop/Exit.
Note
Fax broadcasting is for black & white only.