User Manual
Table Of Contents
- Quick Setup Guide MFC-7420/MFC-7820N
- Getting Started
- Table of Contents
- Step1 Setting Up the Machine
- Step2 Installing the Drivers & Software
- Supplied CD-ROM “MFL-Pro Suite”
- For USB Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP)
- For Parallel Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP)
- For Windows NT® Workstation Version 4.0 Users
- For Network Interface Cable Users (MFC-7820N and Optional NC-2200w only) (For Windows® 98/98SE/Me/NT/2000 Professional/XP)
- For USB Interface Cable Users
- For Network Interface Cable Users (MFC-7820N only)
- For Network Users
- Options and Consumables
- brother ARL/ASA/NZ
4
Setting Up the Machine
Do NOT connect the interface cable.
Connecting the interface cable is
done during the software
installation process.
1
Open the front cover of the machine.
2
Unpack the drum unit assembly.
3
Gently rock it from side to side several times
to distribute the toner evenly inside the
assembly.
4
Put the drum unit assembly into the
machine.
5
Close the front cover of the machine.
1
Install the Drum Unit
Assembly
Front Cover
Step 1