User Manual
Table Of Contents
- USER’S GUIDE MFC-7420/MFC-7820N
- APPROVAL INFORMATION
- Compilation and Publication Notice
- EC Declaration of Conformity
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Turning on Automatic Daylight Savings Time
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (MFC-7420 only)
- Memory Security (MFC-7820N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother UK/IRE/SAF
Chapter 4
4 - 2
To select or change your Receive
Mode
1
Press Menu/Set, 0, 1.
2
Press ▲ or ▼ to select Fax Only,
Fax/Tel, External TAD or Manual.
Press Menu/Set.
3
Press Stop/Exit.
Setting the Ring Delay
The Ring Delay sets the number of times the
machine rings before it answers in
Fax Only
or
Fax/Tel mode. If you have extension
phones on the same line as the machine or
subscribe to the BT Call Sign service, keep
the Ring Delay setting of 4.
(See Operation from extension telephones on
page A-2 and Fax Detect on page 4-3.)
1
If it is not illuminated in green, press
(Fax).
2
Press Menu/Set, 2, 1, 1.
3
Press ▲ or ▼ to select how many times
the line rings before the machine
answers.
Press Menu/Set.
(If you select 00, the line won’t ring at
all.)
4
Press Stop/Exit.
Note
In Ireland, you cannot select 00.
Initial Setup
1.Receive Mode
Current Receive Mode
Fax : Fax Only
F/T : Fax/Tel
TAD : External TAD
Mnl : Manual
Setup Receive
1.Ring Delay