User Manual

Chapter 3
3 - 7
Real Time Transmission
When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the phone line is
free, the machine will start dialling and
sending.
If the memory is full, the machine will send the
document in real time (even if
Real Time
TX
is set to Off).
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax:On or Next Fax:Off for the
next fax only.
1
If it is not illuminated in green, press
(Fax).
2
Press Menu/Set, 2, 2, 5.
3
To change the setting, press ▲ or ▼ to
select
On, Next Fax:On,
Next Fax:Off or Off.
Press Menu/Set.
Note
In Real Time Transmission, the automatic
redial feature does not work when using the
scanner glass.
Broadcasting
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups,
One-Touch, Speed-Dial numbers and up to
50 manually dialled numbers in the same
broadcast.
Press Menu/Set between each of the
numbers. Use Search/Speed Dial to help
you choose the numbers easily. (To set up
Group dial numbers, see Setting up Groups
for Broadcasting on page 5-3.)
After the broadcast is finished, a Broadcast
Report will be printed to let you know the
results.
1
If it is not illuminated in green, press
(Fax).
2
Load your document.
3
Enter a number using One-Touch,
Speed-Dial, a Group number, Search or
manual dialling using the dial pad.
Press Menu/Set.
4
After you have entered all the fax
numbers, press Start.
Setup Send
5.Real Time TX