User Manual
Table Of Contents
- USER’S GUIDE MFC-7420/MFC-7820N
- APPROVAL INFORMATION
- Compilation and Publication Notice
- EC Declaration of Conformity
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Turning on Automatic Daylight Savings Time
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (MFC-7420 only)
- Memory Security (MFC-7820N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother UK/IRE/SAF
Chapter 3
3 - 3
How to Fax
Faxing from the ADF
1 If it is not illuminated in green, press
(Fax).
2
Put the document face up in the ADF.
3
Dial the fax number.
Press Start. The machine starts
scanning the document.
Faxing from the scanner glass
You can use the scanner glass to fax pages
of a book. The documents can be up to A4
size. Put the document face down on the
scanner glass.
Note
Since you can only scan one page at a time,
it is easier to use the ADF if you are sending
a multiple page document.
1
If it is not illuminated in green, press
(Fax).
2
Load your document on the scanner
glass.
3
Dial the fax number.
Press Start.
The machine starts scanning the first
page.
4
To send more than one page, press 1
and go to Step 5.
—OR—
To send a single page, press 2 (or press
Start again).
The machine starts sending the
document.
5
Place the next page on the scanner
glass.
Press Menu/Set.
The machine starts scanning the page.
(Repeat Steps 4 and 5 for each
additional page.)
Next Page?
1.Yes 2.No(Send)
Set Next Page
Then Press Set