User Manual
Table Of Contents
- USER’S GUIDE MFC-7420/MFC-7820N
- APPROVAL INFORMATION
- Compilation and Publication Notice
- EC Declaration of Conformity
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Turning on Automatic Daylight Savings Time
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (MFC-7420 only)
- Memory Security (MFC-7820N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother UK/IRE/SAF
B - 1
B
On-screen
programming
Your machine is designed to be easy to use
with LCD on-screen programming using the
navigation keys. User-friendly programming
helps you take full advantage of all the menu
selections your machine has to offer.
Since your programming is done on the LCD,
we have created step-by-step on-screen
instructions to help you program your
machine. All you need to do is follow the
instructions as they guide you through the
menu selections and programming options.
Menu table
The Menu table that begins on page B-3 will
help you understand the menu selections and
options that are found in the machine’s
programs. Once you become familiar with
programming, you can use the Menu table as
a quick reference when you want to change
your settings.
Note
You can program your machine by pressing
Menu/Set, followed by the menu numbers.
For example to set Beeper Volume to
Low.
Press Menu/Set, 1, 4, 2 and
▲ or ▼ to select
Low.
Press Menu/Set.
Memory storage
If there is a power failure, you will not lose
your menu settings because they are stored
permanently. Temporary settings (such as
Contrast, Overseas Mode, and so on) will be
lost. You may also have to reset the date and
time.
Appendix B