User Manual

A - 3
Changing the remote codes
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Fax Receive Code is 51. The preset
Telephone Answer Code is #51. If you want
to, you can replace them with your own
codes.
1 If it is not illuminated in green, press
(Fax).
2
Press Menu/Set, 2, 1, 4.
3
Press ▲ or ▼ to select On (or Off).
Press Menu/Set.
4
Enter the new Fax Receive Code.
Press Menu/Set.
5
Enter the new Telephone Answer Code.
Press Menu/Set.
6
Press Stop/Exit.
Note
■ If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another
three-digit code using the numbers 0-9,
, #.
■ Remote Codes might not work with some
telephone systems.
Connecting an external
device to your machine
Connecting an external
telephone
You can connect a separate telephone to
your machine as shown in the diagram below.
When you are using an external phone, the
LCD shows
Telephone.
Setup Receive
4.Remote Code
Extension
Telephone
External
Telephone
(Example for the U.K.)