Owner's Manual

REMOTE FAX OPTIONS (NOT AVAILABLE FOR COLOR FAX) 9 - 2
5 Press Stop to exit.
Setting Fax Storage
If you set Fax Storage to ON, you will be able to retrieve fax messages from
another location, using Fax Forwarding, Paging, or Remote Retrieval functions.
The screen will indicate when you have a fax stored in memory.
1 Press Function, 1, 7, 2. The screen
prompts you to choose a fax setting.
2 Press or to select ON (or OFF)
and press Set.
3 Press Stop to exit.
Changing Remote Retrieval Access Code
Enter your Remote Access Code when the MFC picks up your call, so you can
access features remotely. The access code is preset to 1 5 9 , but you can
change this. (See Operation from Extension Telephone, page 6-5.)
1 Press Function, 1, 7, 3.
2 Enter a three-digit number from 000 to 999 and press Set. The “ ” cannot be
changed. (Do not use the same digits that appear in your Fax Receive Code or
Telephone Answer Code.)
3 Press Stop to exit.
You cannot change a Paging number or PIN remotely.
If there are faxes in memory when you
turn the Fax Storage OFF, the screens
prompts you to erase any faxes in
memory.
If you press 1, all fax data is erased and Fax Storage is turned off. If you press
2, data is not erased, and Fax Storage remains on.
(See Printing a Fax in Memory, page 6-6.)
SELECT & SET
FAX STORAGE:OFF?
ERASE ALL FAX?
1.YES 2.NO