Owner's Manual

12 - 2 WALK-UP VIDEO PRINTING
Color Video Printing
1 With no
originals
in the ADF, plug the cable from your video camera’s Video
Out jack into the MFC’s RCA pin jack.
2 Play the video. When the MFC begins
receiving the video signals, the MFC
screen displays:
3 Press Color Copy when you see the picture you want to capture and print. The
MFC begins printing, and beeps when printing is complete.
Black & White Video Printing
For Black and white video printing, follow the steps for Color Video Printing,
using
Mono Copy instead of Color Copy .
Temporary Video Print Setting
You can quickly improve the copy quality of video printouts by using the
Quality key and Options key. These settings are temporary, and the MFC
returnd to its default settings when you finish printing. You might want to try
different combinations of settings to see which best suits you needs.
Using the Quality Key
Your MFC allows you to customize the quality of your video copies by letting
you select the video print quality. You might want to try different combinations
of settings to see which best suits your needs. The settings are temporary.
1
Make sure the ADF is empty
. Plug the cable from your video camera’s Out jack
into the MFC’s RCA pin jack.
2 Press Quality . The screen displays the
current setting, for example:
3 Press
or
to select
QUALITY:NORMAL or QUALITY:HIGH as the copy quality.
4 When the screen displays your selection,
press
Set . The screen displays:
5 Using the dial pad, enter the number of copies you want (up to 99). For example,
If the MFC is not receiving video signals, Color Copy will not work.
However, if there is an original in the ADF, the MFC will print a color copy of
the original.
If there is too much in memory, the print quality will change.
VIDEO:PRESS COPY
CAPTURE READY
QUALITY:NORMAL
PRESS COPY KEY