Owner's Manual

11 - 7 MAKING COPIES
Paper Type
1 Press Function, 3, 1.
2 Press or to select the type of
paper setting and press Set.
• If you use Brother coated paper, select
INK JET, then select BROTHER.
• If you use non-Brother ink jet paper,
select INK JET, then select OTHER.
3 When the screen displays the type of
INK JET paper, press Set. If you did
not select INK JET, go to Step 4.
4 Press Stop to exit.
Copy Quality
1 Press Function, 3, 2.
2 Press or to select the copy
quality and press Set.
3 Press Stop to exit.
Color Adjustment
1 Press Function, 3, 3.
2 Press or to select RED,
GREEN, or BLUE and press Set.
3 Press or to adjust the degree of
color and press Set.
4 Return to Step 2 to select the next color
—OR—Press Stop to exit.
Note
The MFC ejects paper with printed surfaces face up onto the paper tray in the
front of the MFC. When you use transparencies, remove each sheet
immediately, to prevent a paper jam or curled sheets.
1.PAPER TYPE
PAPER:PLAIN
PAPER:INK JET
PAPER:GLOSSY
PAPER:PHOTO
PAPER:TRNSPRNCY
2.QUALITY
QUALITY:HIGH
QUALITY:DRAFT
QUALITY:NORMAL
QUALITY:PHOTO
3.COLOR ADJUST
R:– +
Light Dark
B:– +
G:– +