User Manual
Table Of Contents
- Software User’s Guide
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- Section I: Machine operation keys
- Section II: Windows®
- 2 Printing
- 3 Scanning
- Scanning a document using the TWAIN driver
- Scanning a document using the WIA driver
- Scanning a document using the WIA driver (Windows Photo Gallery and Windows Fax and Scan)
- Using Nuance™ PaperPort™ 12SE
- 4 ControlCenter4
- 5 Remote Setup
- 6 Brother PC-FAX Software
- Section III: Apple Macintosh
- 7 Printing and Faxing
- 8 Scanning
- 9 ControlCenter2
- 10 Remote Setup
- Section IV: Using the Scan key
- Index
ControlCenter4
52
4
g The image will appear in the application you have chosen.
Attaching the scanned data to E-mail 4
The (Send E-mail) button lets you scan a document to your default E-mail application, so you can send
the scanned job as an attachment.
a Select the Scan tab.
b Configure the settings in the PC Scan setting area.
c Click (Scan).
d Confirm and edit (if necessary) the scanned image in the image viewer.
e Click (Send E-mail).
f Configure the attached file settings and click OK.
g Your default E-mail application will open and the image will be attached to a new, blank E-mail.
Note
Webmail services are not supported by Scan to E-mail.
Using the OCR feature 4
The (OCR) button lets you scan a document and convert it into text. This text can be edited using your
favourite word processing software.
a Select the Scan tab.
b Configure the settings in the PC Scan setting area.
c Click (Scan) button.
d Confirm and edit (if necessary) the scanned image in the image viewer.
e Click (OCR).
f Configure the OCR settings and click OK.
g Your default word processing application will open and display the converted text data.