User Manual
Table Of Contents
- Quick Setup Guide FAX-2950/MFC-7240/MFC-7290
- Start Here
- 1 Unpack the machine and check the components
- 2 Remove the packing material from the machine
- 3 Attach the ADF Document Output Support
- 4 Install the Handset
- 5 Load paper in the paper tray
- 6 Connect the power cord and telephone line
- 7 Set your country
- 8 Choose a Receive Mode
- 9 Set the LCD contrast (if needed)
- 10 Set the date and time
- 11 Enter personal information (Station ID)
- 12 Fax Transmission Report
- 13 Set tone or pulse dialling mode (not available in New Zealand)
- 14 Set the telephone line compatibility
- 15 Set the telephone line type (Middle East and Africa only)
- 16 Dial Prefix (not available in Middle East and Africa)
- 17 Set Daylight Saving Time (Oceania and Asia only)
- 18 Automatic Daylight Savings Time (Middle East and Africa only)
- 19 Choose your Operating System
- For Windows® Users (Windows® XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- For Macintosh Users (Mac OS X 10.5.8 - 10.7.x)
- Other Information
- Consumables
- Start Here
5
c Attach the ADF Document Output Support.
d Close the control panel cover.
4
Install the Handset
a Connect the curled handset cord to the
machine and the other end to the handset.
5
Load paper in the paper
tray
a Pull the paper tray completely out of the
machine.
b While pressing the green paper-guide release
lever a, slide the paper guides to fit the paper
size you are loading in the tray. Make sure that
the guides are firmly in the slots.
1