User Manual
Table Of Contents
- Quick Setup Guide FAX-2950/MFC-7240/MFC-7290
- Start Here
- 1 Unpack the machine and check the components
- 2 Remove the packing material from the machine
- 3 Attach the ADF Document Output Support
- 4 Install the Handset
- 5 Load paper in the paper tray
- 6 Connect the power cord and telephone line
- 7 Set your country
- 8 Choose a Receive Mode
- 9 Set the LCD contrast (if needed)
- 10 Set the date and time
- 11 Enter personal information (Station ID)
- 12 Fax Transmission Report
- 13 Set tone or pulse dialling mode (not available in New Zealand)
- 14 Set the telephone line compatibility
- 15 Set the telephone line type (Middle East and Africa only)
- 16 Dial Prefix (not available in Middle East and Africa)
- 17 Set Daylight Saving Time (Oceania and Asia only)
- 18 Automatic Daylight Savings Time (Middle East and Africa only)
- 19 Choose your Operating System
- For Windows® Users (Windows® XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- For Macintosh Users (Mac OS X 10.5.8 - 10.7.x)
- Other Information
- Consumables
- Start Here
16
Macintosh
USB
For Macintosh Users
(Mac OS X 10.5.8 - 10.7.x)
20
Before you install
a Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
b Connect the USB cable to the USB port
marked with the symbol on your machine
and then connect the cable to your Macintosh.
c Make sure your machine’s power switch is on.
21
Install MFL-Pro Suite
a Put the installer CD-ROM into your CD-ROM
drive.
b Double-click the Start Here OSX icon. If
prompted, select your model and then follow
the on-screen instructions.
c Choose your machine from the list, and then
click OK.
d When this screen appears, click Next.
IMPORTANT
For users of Mac OS X 10.5.7 or lower, upgrade
to Mac OS X 10.5.8 - 10.7.x. (For the latest drivers
and information for the Mac OS X you are using,
visit http://solutions.brother.com/
.)
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few minutes for the
installation to complete.
The installation of MFL-Pro Suite is now
complete.
Go to step 22 on page 17.