User's Manual
Table Of Contents
- USER’S GUIDE FAX-2820/FAX-2910/FAX-2920/MFC-7220/MFC-7225N
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer (FAX-2820, FAX-2910 and FAX-2920 only)
- Setting the Mode Timer (MFC-7220 and MFC-7225N only)
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Turning on Automatic Daylight Savings Time
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (FAX-2820, FAX-2910 and MFC-7220 only)
- Memory Security (FAX-2920 and MFC-7225N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialing options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features (MFC-7220 and MFC-7225N only)
- 10 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the United States only.
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- Disconnect device
- LAN connection (MFC-7225N only)
- Laser safety
- FDA regulations
- Important safety instructions
- Trademarks
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Product description
- General
- Print media
- Copy
- Fax
- Scanner (MFC-7220 and MFC-7225N only)
- Printer (not available for FAX-2910)
- Interfaces (not available for FAX-2910)
- Download the optional software from the Brother Web Site (FAX-2820 and FAX-2920 users only)
- At the same time, you can download the manual for setting up and using the PC-Fax software.
- Computer requirements (not available for FAX-2910)
- Consumable items
- Network (LAN) (MFC-7225N only)
- Index
- Remote Retrieval Access card
- brother USA/CAN
Important information
10 - 5
10
D Unplug this product from the AC power outlet
and refer all servicing to Brother Authorized
Service Personnel under the following
conditions:
• When the power cord is damaged or
frayed.
• If liquid has been spilled into the product.
• If the product has been exposed to rain or
water.
• If the product does not operate normally
when the operating instructions are
followed. Adjust only those controls that
are covered by the operating instructions.
Improper adjustment of other controls may
result in damage and will often require
extensive work by a qualified technician to
restore the product to normal operation.
• If the product has been dropped or the
cabinet has been damaged.
• If the product exhibits a distinct change in
performance, indicating a need for service.
E
To protect your product against power
surges, we recommend the use of a power
protection device (Surge Protector).
F
To reduce the risk of fire, electric shock and
injury to people, note the following:
• Do not use this product near appliances
that use water, a swimming pool or in a wet
basement.
• Do not use the machine’s telephone during
an electrical storm (there is the remote
possibility of an electrical shock) or to
report a gas leak in the vicinity of the leak.
• Do not dispose of batteries in a fire. They
may explode. Check with local codes for
possible special disposal instructions.
G Caution - To reduce the risk of fire, use only
No.26 AWG or larger telecommunication line
cord.
Trademarks
The Brother logo is a registered trademark of
Brother Industries, Ltd.
Brother is a registered trademark of Brother
Industries, Ltd.
Multi-Function Link is a registered trademark of
Brother International Corporation.
© 2006 Brother Industries, Ltd. All rights reserved.
Windows and Microsoft are registered trademarks
of Microsoft in the U.S. and other countries.
Macintosh and TrueType are registered
trademarks of Apple Computer, Inc.
PaperPort and OmniPage OCR are registered
trademarks of ScanSoft, Inc.
Presto! PageManager is a registered trademark of
NewSoft Technology Corporation.
Each company whose software title is mentioned
in this manual has a Software License Agreement
specific to its proprietary programs.
All other brand and product names mentioned
in this User’s Guide, the Software User’s
Guide* and the Network User’s Guide** are
registered trademarks of their respective
companies.
* MFC-7220 and MFC-7225N
** MFC-7220 (option)
MFC-7225N (included)